Standard features
Vega stabilisers are available for different ranges of input voltage fluctuation.
Standard models offer a double input connection so that with the same unit two different input variations (±15/±20% or ±25/±30%) can be dealt with.
An automatic circuit breaker is mounted on the regulation circuit to protect against overload and short circuit on the voltage regulator, whilst the auxiliary circuit is protected by fuses.
A digital display on the front panel shows the output voltage and the alarms (min/max output voltage, gearmotor lock, internal overheating, regulator overload).
The control logic is based on a digital microprocessor.
| Selectable output voltage (dip-switch)* | 220-230-240V |
| Frequency | 50/60Hz ±5% |
| Admitted load variation | Up to 100% |
| Cooling | Natural ventilation |
| Ambient temperature | -25/+45°C |
| Storage temperature | -25/+60°C |
| Max relative humidity | 95% |
| Admitted overload | 200% 2min |
| Harmonic distortion | None introduced |
| Colour | RAL 7035 |
| Protection degree | IP 21 |
| Instrumentation | Output digital voltmeter |
| Installation | Indoor |
* The output voltage can be adjusted by choosing one of the indicated values.
Such choice sets the new nominal value as a reference for all the stabiliser parameters.
